Comtech EF Data CDM-625 - Manual (Page 152)

CDM-625 Advanced Satellite Modem Revision 15
Front Panel Operation MN-CDM625
5–52
Press ENTER after composing the SNMP Read Community String. All trailing spaces are removed
from the string upon entry.
CONFIG: IP  SNMP  Communities  Write
SNMP Write Community:
Private (20 chars) ()
To edit the SNMP Write Community string, use the ◄ ► arrow keys to select a character to edit,
and then use the ▲▼ arrow keys to edit that character.
Only the first 20 characters on the bottom line are available.
All printable ASCII characters are available with the exception of the backslash (ASCII code 92)
and ~ (ASCII code 126).
Press ENTER after composing the SNMP Write Community String. All trailing spaces are removed
from the string upon entry.
CONFIG: IP  SNMP  Traps
Traps: Community Version
IP-Addr#1 IP-Addr#2 ()
Use the ◄ ► arrow keys to select Community, Versions, IP-Addr#1 or IP-Addr#2, and then press
ENTER.
CONFIG: IP  SNMP  Traps  Community
SNMP Traps Community:
Comtech (20 chars) ()
To edit the SNMP Traps Community string, use the ◄ ► arrow keys to select a character to edit,
and then use the ▲▼ arrow keys to edit that character.
Only the first 20 characters on the bottom line are available.
All printable ASCII characters are available with the exception of the backslash (ASCII code 92)
and ~ (ASCII code 126).
Press ENTER after composing the SNMP Traps Community String. All trailing spaces are removed
from the string upon entry.