TeeJet Legacy 6000 Manual - Manual (Page 99)

Chapter 4 - operation 94
Table 4-3: Headland Guidance Softkeys
softkey description
Selects a guidance pattern (typically headland).
headland on. Begins headland application. make as many headland passes as
desired. the operator can establish a boundary map and mark Points a and B during
first pass application.
headland off. when the last headland pass is complete, press this softkey. the opera-
tor then applies the first interior pass using the Headland pattern for guidance.
Ignore Headland. Once the first interior pass is complete, switch from the current
guidance pattern to the ignore headland pattern. Continue to apply the remainder of
the field.
to use ignore headland guidance mode after the completion of the initial head-
land passes, begin the application process for the interior of the field. Press the
ignore headland button to initiate the ignore headland guidance mode. this will
indicate to the vehicle that headland passes exist so they won’t be used for guid-
ance purposes.
if the operator forgot to turn headland off after turning it on:
consider all sprayed passes so far as part of the headland
•
complete the current pass
•
press the
•
Headland Off softkey
make a pass guiding along the headland (last pass)
•
switch to ignore headland mode
•
continue making passes
•
if the operator forgot to mart the headland:
complete the current pass
•
press the headland oN softkey and make another pass along the head-
•
lands in the field.
switch the guidance pattern to ignore headland mode and spray the re-
•
mainder of the field.
Headland Off
softkey
Ignore Headland
softkey