TeeJet Legacy 6000 Manual - Manual (Page 144)

Legacy 6000
98-05053 R2
139
the Controller Setup page contains every setup option available in list format.
From this list each Controller Setup item can be edited individually, or the Control-
ler Setup wizard can be used. the top item on the setup list is the Setup wizard.
to run the Setup wizard, highlight from the main list using the Ar-
row keys and press the Enter button. Setup wizard will navigate through the entire
Controller Setup item list.
Table 7-3: Controller Setup Settings
settings description
Settings description
Controller Defines the type of compatible rate controller to be connected to the Legacy 6000.
Com Port Defines the Legacy 6000 COM Port to which the rate controller is connected.
Base Rate Defines the base rate required for a Rawson Controller. This is inactive unless the
Rawson Controller is previously selected.
Status detect active when the Rawson Controller or “None” is selected. must be set to “on” if using
the teeJet input Status module.
Table 7-4: Compatible External Rate Controllers
Controller driver name product Type
all mid-tech taSC teeJet 98 all
Raven 440, 450, 460, 660, 661 RavenLig100 (single product) Liquid
Raven 440, 450, 460, 660, 661 Ravengran100 (single product) dry
Raven 750 Raven 750 Liquid
Raven 760 Raven 760 gran dry
Raven 760 Raven 760 Liquid
teeJet 854 teeJet 854 Liquid
Case Flexhead Case Flex400 dry
mark iii mark iV dry
diCkey-john Land manager N/a
once the controller settings or the status detect settings have been changed, the
Legacy 6000 console must be powered off before continuing.
Arrow keys
Enter button