TeeJet Legacy 6000 Manual - Manual (Page 36)

Legacy 6000
98-05053 R2
31
Calculating the prime value
uS:
( line diameter in inches/ 2 )2 x 3.1416 x line length in inches x 0.5541 = volume in fluid ounces
metric:
(line diameter in cm/2)2 x 3.1416 x line length in cm = volume in ml
units
available units are based on application and drive types (Liquid, granular, Seeder,
Nh3, motor, and injection). the Control Basis determines whether the units avail-
able are area-based, time-based, or distance-based. these parameters should
be established prior to selecting the units of measurement.
to access the Control Basis page from the Units page, press the Settings softkey.
the operator will then be able to scroll through the various options available using
the Arrow keys based on previously-selected application and drive type settings.
once the appropriate units have been established, press the Forward Arrow soft-
key to save the selection and advance to the next page.
Figure 2-26: Units - Control Basis Options
Forward Arrow
softkey (F6)
Settings softkey
(F2)
Arrow keys
Note: most applications are area-based.