TeeJet Legacy 6000 Manual User Manual

Page 120

Text mode
Original mode

Legacy 6000

98-05053 R2

115

Figure 5-6: Channel ON and Assigning ID

Press the Forward Arrow softkey to advance to the Base Channel page. one of
the channels must be set as the base channel. this channel will handle the ground
speed input. use the Arrow keys to toggle to the desired selection (yeS/No) and
press the Enter button to make the selection.

Figure 5-7: Setting the Base Channel

Press the Forward Arrow softkey to advance to the Reset page. upon initial power-
up it is recommended to reset the settings to factory default per channel. use the
Arrow keys to toggle to the desired selection (yeS/No) and press the Enter button
to make the selection.

Forward Arrow

softkey (F6)

Arrow keys

Enter button