TeeJet Legacy 6000 Manual - Manual (Page 55)

Chapter 3 - Product application Setup 50
automatic Job Naming
Jobs can be named by pressing the Auto-Name softkey on the New Job Name
page. a job is named based on the current date followed by a sequential job num-
ber in relation to the number of jobs created that day. For instance, the first job on
January 31, 2006, is automatically named 01312006-1. the second job for the
same day is named 01312006-2.
No PCmCia Card
if the PC Card is not turned on during Console Setup, there is no prompt for a Job
Name when starting aRm. instead, the opportunity is presented to reset some
product-related volumes and area totals.
Figure 3-3: Reset Page
Table 3-2: Reset Page Settings
settings description
None No volume or area totals stored in the dCm will be reset.
total Reset Resets field area, field volume, and total volume and area stored in all DCMs to zero.
Field Reset Resets field area and field volume stored in all DCMs to zero.
Auto Name
softkey (F7)