TeeJet Legacy 6000 Manual - Manual (Page 129)

Chapter 6 - mapper 124
Table 6-2: Setup Options
settings description
map File Same file name as the Job Name. The file name can be changed to better describe
the application. all mapping functions (lines, points, hazards, and polygon) are stored
in this file as .GMF and .BND on the PC Card.
Background File Created prior to the mapper session. transferred to the root directory of the PC Card
(i.e., points or hazards mapped during product application such as rocks that the
operator would like to return to pick up). File formats allowed are (.gmF and .BNd).
Base map File Similar to Background files but .TIF. Downloaded from the Internet and placed on the
root directory of the PC Card. Pictures with geo-referenced coordinates to provide
location (e.g., elevation, roadway maps).
Collection intervals Frequency data is written to the PC Card. the selection can range from once per
second to five times per second.
markers
markers allow the prenaming of commonly used points and hazards. these names
will appear on the left side of the map page.
Figure 6-4: Markers
Table 6-3: Road Marker Parameters
settings description
marker # The type of marker being defined (Point, Hazard, and Not Used).
Name # The name of the marker defined above.