TeeJet Legacy 6000 Manual - Manual (Page 24)

Legacy 6000
98-05053 R2
19
Table 2-2: Console Settings
setting description
PC Card indicates that a PC Card is being used.
Shape Files Indicates whether the system is creating ESRI Shape files at the end of each job.
units Defines the system units (US or Metric).
Language Defines the system language (currently English, Dutch, German, French, Spanish, Italian).
Speaker Sets the system speaker options (internal or external).
Volume Sets the speaker volume.
date Format Defines the date format displayed (MM/DD/YY or DD/MM/YY).
System date Sets the system date.
time Format Defines the time format displayed on the console (12 hr or 24 hr).
System time Sets the system time.
time zone Sets the time zone of operation.
application Specifies how the system controls product application.
dCm module is a CaN Bus system using a dual Control module - geN ii.
PCm module is a CaN Bus system using a Product Control module - geN i.
external uses an external rate controller.
Lightbar Setup
Lightbar Setup configures the lightbar.
Figure 2-14: Lightbar Setup Page
Lightbar Setup
softkey