TeeJet Legacy 6000 Manual - Manual (Page 19)

Chapter 2 - System overview 14
Figure 2-5: Establishing Base Channel
upon initial power up, it is recommended to reset the settings to factory default.
the system will prompt the operator to perform this operation for each channel by
pressing the Forward Arrow softkey.
Reset is an option for each channel. For new installations, choose yeS. Reset
will occur once the last channel is configured and the Forward Arrow softkey is
executed to exit Channel Setup.
Figure 2-6: Reset CAN Bus to Factory Default
Once the CAN Bus is configured, the Launcher page will be displayed. the
Launcher page is the main page of the Fieldware software. all software applica-
tions are accessed from this main page: System Setup, System tools, application
Rate manager (aRm), and mapper.
Forward Arrow
softkey (F6)