Job report setup, No pcmcia card, Job report wizard – TeeJet Legacy 6000 Manual User Manual
Page 62
Legacy 6000
98-05053 R2
57
Figure 3-11: Reverse Prime and Prime State Button
JoB RePoRt SetuP
Job Report contains the information necessary to build an application report after a
job has been completed. application reports are generated in the Fieldware tools
map manager desktop program. Job Report is accessed from the Launcher page.
Select the Job Report softkey. table 3-3 describes each Job Report menu item.
NOTE: It is not necessary to complete Job Report information in order to begin
product application. Job Report information should be completed if the
operator wants this data in the Job Report.
No PCmCia Card
if the PC Card setting in Console Setup is “No”, the Job Report tab will not appear
on the aRm Launcher page.
Job Report wizard
the Job Report page contains every setup option available in list format. From
this list each Job Report item can be edited individually, or the Job Report Setup
wizard can be used. the top item on the setup list is the Setup wizard. to run the
Setup wizard, highlight
and press the Enter button. Setup wizard will navigate through the entire Job Re-
port Setup item list.
reverse
prime
button
Note: Reverse prime only works if
check valves are not installed in
the injection lines.
Job Report
softkey
Arrow keys
Enter button