TeeJet Legacy 6000 Manual - Manual (Page 109)

Chapter 4 - operation 104
the Hazard Name screen will retain the 10 most recent entries. to select a recent
entry, scroll through the dialog window using the Arrow keys and select the desired
hazard name. to add a new name, press the New Name softkey. a name input
dialog will launch that will allow a new name to be entered using the Arrow keys.
Press the Enter button to save the new name.
Figure 4-35: Mapping and Naming Hazards
object Name Files
Simple text files can be created for commonly used application files (e.g., “weeds”).
For additional information about file names, refer to the Fieldware Tools/Map Man-
ager User’s Guide. Once names file are established, they can be loaded onto
Legacy 6000 console memory. To load files, place the names in the /sys/names
folder on the root of the PC Card. go to System tools - device manager. Select
“Console” as the device and run “update Console using System Files Located on
the PC Card”. Select “object Names” from the update Files list. Press the enter
button to update the names files.
eXitiNg oPeRatioN
Press the Exit softkey (located on the bottom left corner of the screen) to exit
oPeRatioNS. if data is being stored to the PC Card, the exit process may take
a few minutes.
Arrow keys
New Name
softkey
Enter button
Exit softkey