TeeJet Legacy 6000 Manual - Manual (Page 54)

Legacy 6000
98-05053 R2
49
existing Job Selection
to select an existing job, use the Arrow keys to scroll through the list of jobs dis-
played in the center column of the Job screen. an existing job has an associated
file folder located on the PC Card. The name of the job folder is the same as the
job name.
Job Creation Based on existing Jobs
a new job can also be created based on the settings of an existing job. this is a
fast way to start a new job where most or all of the settings are the same as an
existing job. any of these settings can be altered in the new job as required. Select
the desired job on which to base the new job. Press the Copy Job softkey. Cre-
ate a new job name or auto name the job and press the Forward Arrow softkey.
all settings are viewable from the aRm Launcher page and can be changed as
required, or press the Bullseye softkey to start the application based on the last
job settings.
manually Naming Jobs
From the New Job Name page, use the Arrow keys and enter the name of the job.
Job names may contain alphanumeric characters. when the desired job name has
been entered, press the Forward Arrow softkey to save the name and advance to
the ARM Launcher page.
Figure 3-2: Naming Jobs
Arrow keys
Copy Job
softkey (F7)
Forward Arrow
softkey (F6)
Bullseye
softkey (F6)
existing job names displayed in center
column or new job names entered
here