TeeJet Legacy 6000 Manual - Manual (Page 103)

Chapter 4 - operation 98
FieLdPiLot
FieldPilot is teeJet technologies’ assisted steering system that also includes op-
tional product control and Swath manager. FieldPilot relies on positioning from a
dgPS receiver and provides autosteer capabilities for precision application and
control. a dgPS system must be installed in order to use FieldPilot. FieldPilot
Setup is accessed by pressing the System Setup softkey on the Launcher page,
followed by the FieldPilot Setup softkey. Setting adjustments include lookahead,
aggressiveness, sensitivity, and disengage distance.
Figure 4-27: FieldPilot Access
Table 4-4: FieldPilot Settings
setting description
Lookahead increase if the vehicle is oscillating; decrease if the vehicle is having trouble getting
online.
aggressiveness increase to sharpen steering if vehicle consistently tracks outside of curves. decrease
to loosen steering if vehicle consistently tracks inside of curves.
Sensitivity decrease if the steering is choppy or too responsive.
disengage distance distance from guideline when FieldPilot automatically disengages after being online.
apply Settings applies and saves new settings.
Restore Settings Restores settings to factory default.
System Setup
softkey
FieldPilot Setup
softkey
Apply Settings
softkey
Restore Settings
softkey