TeeJet Legacy 6000 Manual - Manual (Page 87)

Chapter 4 - operation 82
Table 4-1: Operation Softkeys
softkey description
exit. exits out of oPeRatioNS and returns to the main menu.
Next Page. Switches between the map page and the information page.
additional information Page. displays additional product information and gPS informa-
tion such as latitude, longitude, speed, course, and bounded acres.
alarm Silence. Silences an alarm.
manual Valve open. opens the control valve.
manual Valve Close. Closes the control valve.
System tools. used to monitor system devices without exiting out of the Rates pages.
also used to access test Speed.
Reset initial Quantity. used to monitor the amount of product remaining for application.
when pressed, the value will be reset to the initial Quantity established during Product
Setup.
FieldPilot. when this softkey is visible, FieldPilot is active. allows the operator to adjust
the FieldPilot system without exiting operations.
the map Page
the Map page allows the product application process to be viewed. the page dis-
plays the vehicle’s current location, implement status, and application trajectory. if
utilizing variable rate application using a prescription map, the prescription map is
also displayed in the background. the Map page is associated with the highlighted
product control softkey, located on the left side of the screen.
to access the Map page from the Product Application pages, select the Next Page
softkey. all guidance-related softkeys will be displayed on the right column of the
Map page. table 4-2 provides a description of each softkey displayed on the Map
page.
Next Page
softkey (F10)