TeeJet Legacy 6000 Manual - Manual (Page 74)

Legacy 6000
98-05053 R2
69
Figure 3-24: Prescription Map Selection
variable rates for multiple products
there are two ways of creating prescriptions to perform variable rate application
for multiple products. The first way is to create a separate prescription map for
each product. The second way is to create one prescription map with a file that
contains all of the products.
to use a prescription map for each product:
1. From the ARM Launcher page press the Product
Setup softkey.
2. use the Arrow keys to select the desired Chan-
nel to be configured. If only one channel is es-
tablished on the system, this screen will not ap-
pear.
3. Select “Prescription” from the Product Setup
screen. Press the Enter button.
4. Select the appropriate prescription map by using
the Arrow keys to scroll through the prescription
options. “None” is the default setting. Press the
Forward Arrow softkey to continue to the next
page.
5. if the prescription has a product name stored in
the file, it will automatically appear once the pre-
scription map is selected.
6. manual or Straight rates can be entered as well.
7. Repeat for each channel.
Product Setup
softkey
Arrow keys
Enter button
Forward Arrow
softkey (F6)