Controller setup, Implement setup completion – TeeJet Legacy 6000 Manual User Manual

Page 143

Text mode
Original mode

Chapter 7 - eXt

138

implement Setup Completion

once the necessary entries have been made, the Finish page will be displayed.
Select the Review Settings softkey to review the selected configurations. Select the
Forward Arrow to save the configuration and return to the main ARM launcher.

Figure 7-5: Implement Setup Finish Page

CoNtRoLLeR SetuP

the type of external rate controller to be connected to the Legacy 6000 console
is selected during Controller Setup. Select “System Setup (F1)” from the Main
Launcher page to launch the System Setup page. From the System Setup page
select “Controller Setup”.

Figure 7-6: Controller Setup Page

Review Settings

softkey (F2)

Forward Arrow

softkey (F6)