Monitor settings – TeeJet Legacy 6000 Manual User Manual

Page 42

Text mode
Original mode

Legacy 6000

98-05053 R2

monitor settings

monitor Shaft, Product detect, Low Bin, Status, Pressure digital, Pressure analog,
and Flowmeter have the same settings. all monitors have initial settings as well as
sub-settings. to access the sub-settings, locate the two Sub-Settings softkeys on
the right side of the screen. use the two softkeys to toggle between the screens.
Refer to table 2-18 for a description of the sub-settings. once the sub-settings and
parameters have been selected, press the Forward Arrow softkey to advance to
the next Channel Setup page.

Figure 2-31: Monitor Settings/Sub-Settings

Forward Arrow

softkey (F6)

Sub-Settings

softkey (F10)

Initial_Settings

softkey (F9)

Spread Switch Setting