TeeJet Legacy 6000 Manual - Manual (Page 132)

Legacy 6000
98-05053 R2
127
maPPeR aPPLiCatioN
once setup is complete, the mapper application can be accessed. to access the
map page, select the Mapper softkey on the main Setup page.
Figure 6-8: Launching Mapper Application
map Page
the Map page is the first page the operator will view when entering the mapper ap-
plication. the Map page displays the vehicle at its current location and trajectory. if
a base or background map was previously loaded, it will be displayed in the back-
ground. map softkeys are displayed on the right side of the screen. established
points and hazards are displayed on the left side of the screen. additional keys are
available by scrolling on the right side of the screen.
Figure 6-9: Map Page
Mapper softkey
Mapper softkey