Rockwell Automation 7000A PowerFlex Medium Voltage Drive (A-Frame) - Classic Control - Manual (Page 16)

P-2 Preface
7000A-UM150F-EN-P – June 2013 7000 “A” Frame
Both of the above could indicate:
• A possible trouble spot
• Tell what causes the trouble spot
• Give the result of an improper action
• Tell the reader how to avoid trouble
S H O C K H A Z A R D S H O C K H A Z A R D This symbol alerts the user to a potential
electrical shock hazard that exists on a
component or printed circuit board.
General Precautions
A T T E N T I O N A T T E N T I O N This drive contains ESD (Electrostatic
Discharge) sensitive parts and assemblies.
Static control precautions are required when
installing, testing, servicing or repairing this
assembly. Component damage may result if
ESD control procedures are not followed. If
you are not familiar with static control
procedures, reference Allen-Bradley
publication 8000-4.5.2, “Guarding Against
Electrostatic Damage” or any other
applicable ESD protection handbook.
A T T E N T I O N A T T E N T I O N An incorrectly applied or installed drive can
result in component damage or a reduction in
product life. Wiring or application errors,
such as, undersizing the motor, incorrect or
inadequate AC supply, or excessive ambient
temperatures may result in malfunction of the
system.
A T T E N T I O N A T T E N T I O N Only personnel familiar with the PowerFlex
7000 Adjustable Speed Drive (ASD) and
associated machinery should plan or
implement the installation, start-up and
subsequent maintenance of the system.
Failure to comply may result in personal
injury and/or equipment damage.