Rockwell Automation 57C570 AutoMax PC3000 User Manual User Manual

Page 89

5Ć11

Figure 5.5 Ć List of Device Conflicts

Step 3.

Deselect the Use automatic settings option.

Step 4.

Based on the list of conflicting devices, select the

appropriate Resource Type from the list.

Step 5.

Click the Change Setting button, and choose another

value in the Value list. Make sure that the new value does

not conflict with other devices. This information is

displayed in the Conflict Information box.

Step 6.

Click OK to return to the Resources tab.

Step 7.

Use this table to determine your next step.

ББББББББББ

If:

ББББББББББ

Then:

ББББББББББ

other conflicting devices are present

ББББББББББ

repeat steps 5-7 for each remaining

conflicting device

ББББББББББ

ББББББББ

ББББББББББ

no other conflicting devices exist

ББББББББББ

ББББББББ

ББББББББББ

a) At the Resource tab, click OK.

b) When prompted to confirm that

you have manually changed the

card's settings, click Yes.

c) When prompted, shutdown the

Windows 95 operating system

and restart the computer.

Step 8.

Finish installing the Processor card by editing the

SYSTEM.INI and CONFIG.SYS files. Go to section 5.4.2

and 5.4.3.

This manual is related to the following products: