Rockwell Automation 57C570 AutoMax PC3000 User Manual User Manual
Page 223

20Ć5
20.3.1
Removing the Old AutoMax PC3000 Processor
Card
To remove the AutoMax PC3000 Processor card, follow the steps for
the AutoMax PC3000 model you are using:
БББББББББББ
БББББББББББ
Removing the card from an PC3000
Packaged Version:
ББББББББББ
ББББББББББ
Removing the card from a PC
chassis:
БББББББББББ
Б
БББББББББ
Б
Б
БББББББББ
Б
БББББББББББ
Step 1.
Turn off power to the
AutoMax PC3000
Packaged Version.
Disconnect the incoming
lines.
ББББББББББ
Б
ББББББББ
Б
Б
ББББББББ
Б
ББББББББББ
Step 1.
Complete the steps in
section 20.4.
БББББББББББ
Б
БББББББББ
Б
Б
БББББББББ
Б
Б
БББББББББ
Б
БББББББББББ
Step 2.
Disconnect the
AllenĆBradley Remote I/O
cables and the DCSĆNET
network cables, if present.
ББББББББББ
Б
ББББББББ
Б
Б
ББББББББ
Б
Б
ББББББББ
Б
ББББББББББ
Step 2.
Shutdown the Windows 95
operating system, and turn
off power to the PC
chassis. Disconnect the
incoming power cord.
БББББББББББ
Б
БББББББББ
Б
Б
БББББББББ
Б
БББББББББББ
Step 3.
If the chassis is mounted,
you may want to unĆmount
it to make replacing the
card easier.
ББББББББББ
Б
ББББББББ
Б
Б
ББББББББ
Б
ББББББББББ
Step 3.
Disconnect the
AllenĆBradley Remote I/O
cables and the DCSĆNET
network cables, if present.
БББББББББББ
Б
БББББББББ
Б
БББББББББББ
Step 4.
Open the chassis.
ББББББББББ
Б
ББББББББ
Б
ББББББББББ
Step 4.
Place the chassis on a flat
surface.
БББББББББББ
Б
БББББББББ
Б
Б
БББББББББ
Б
Б
БББББББББ
Б
Б
БББББББББ
Б
БББББББББББ
Step 5.
Using a screwdriver,
remove the hold down
clamp and the slot cover's
screw that holds the
AutoMax PC3000
Processor card in place.
ББББББББББ
Б
ББББББББ
Б
Б
ББББББББ
Б
Б
ББББББББ
Б
Б
ББББББББ
Б
ББББББББББ
Step 5.
Open the PC chassis.
БББББББББББ
Б
БББББББББ
Б
Б
БББББББББ
Б
Б
БББББББББ
Б
БББББББББББ
Step 6.
Disconnect the ribbon
cable from the AutoMax
PC3000 Processor card.
ББББББББББ
Б
ББББББББ
Б
Б
ББББББББ
Б
Б
ББББББББ
Б
ББББББББББ
Step 6.
Using a screwdriver,
remove the slot cover's
screw that holds the
AutoMax PC3000
Processor card in place.
БББББББББББ
Б
БББББББББ
Б
Б
БББББББББ
Б
Б
БББББББББ
Б
БББББББББББ
Step 7.
Remove the card from the
slot, making sure to hold
the card by its edges.
ББББББББББ
Б
ББББББББ
Б
Б
ББББББББ
Б
Б
ББББББББ
Б
ББББББББББ
Step 7.
If you have an AutoMax
PC3000 Serial card
installed, disconnect the
ribbon cable from the
AutoMax PC3000
Processor card.
БББББББББББ
Б
БББББББББ
Б
БББББББББББ
ББББББББББ
Б
ББББББББ
Б
ББББББББББ
Step 8.
Remove the card from the
slot, making sure to hold
the card by its edges.