Appendix c - dc common bus applications, Before you begin, Appendix c – Rockwell Automation 2094-EN02D-M01-Sx Kinetix 6200 and Kinetix 6500 Modular Multi-axis Servo Drives User Manual User Manual
Page 267: Dc common bus applications, Appendix c beginning on, Appendix c beginning, Appendix
Rockwell Automation Publication 2094-UM002E-EN-P - May 2012
267
Appendix
C
DC Common Bus Applications
This appendix provides information and an example for calculating additional
bus capacitance specific to the Kinetix 6200 and Kinetix 6500 modular drive
systems configured for DC common bus.
Calculating capacitance, as it applies to the Bulletin 2094 shunt module and
Kinetix 6000M IPIM module, is also included in this appendix.
Before You Begin
These procedures assume you have mounted and wired your Kinetix 6200 or
Kinetix 6500 DC common-bus system.
Before you set the Additional Bus Capacitance parameter in RSLogix 5000
software, you need to calculate these values:
• Total bus capacitance
• Additional bus capacitance
Topic
Page
Calculate Total Bus Capacitance
Calculate Additional Bus Capacitance
Bulletin 2094 Drive Capacitance Values