Rockwell Automation 2094-EN02D-M01-Sx Kinetix 6200 and Kinetix 6500 Modular Multi-axis Servo Drives User Manual - Manual (Page 223)

Rockwell Automation Publication 2094-UM002E-EN-P - May 2012 223
Chapter
9
Removing and Replacing the
Kinetix 6200 and Kinetix 6500 Drive Modules
This chapter provides remove and replace procedures for your Kinetix 6200 and
Kinetix 6500 system components.
Before You Begin You will need these tools available before you begin removal and replacement
procedures:
• A small screwdriver, 3.5 mm (0.14 in.)
• Voltmeter
Topic Page
Before You Begin 223
Remove Kinetix 6200 and Kinetix 6500 Drive Modules 224
Replace Kinetix 6200 and Kinetix 6500 Drive Modules 227
Remove the Power Rail 228
Replace the Power Rail 229
ATTENTION: This drive contains electrostatic discharge (ESD) sensitive parts
and assemblies. You are required to follow static-control precautions when you
install, test, service, or repair this assembly. If you do not follow ESD control
procedures, components can be damaged. If you are not familiar with static
control procedures, refer to Guarding Against Electrostatic Damage, publication
8000-4.5.2 , or any other applicable ESD awareness handbook.