4 selecting paper size automatically: auto paper, Selecting paper size automatically: auto paper -49 – Konica Minolta bizhub PRESS C8000e User Manual
Page 87
bizhub PRESS C8000
3-49
3.6
Paper Setting
3
3.6.4
Selecting Paper Size Automatically: Auto Paper
Auto Paper detects the original size and automatically selects and feeds copy paper of the same size (×1.0
magnification mode), or selects an appropriate size according to the magnification ratio selected (Zoom
mode).
d
Reference
The original sizes to be detected from the ADF or original glass are previously determined. See page 2-15
for details.
The original sizes to be detected from the ADF or original glass can be changed. See page 10-58 for details.
An administrator can set a tray or paper condition to be incompatible with Auto Paper. For details, see Sec-
tion 9 of the User's Guide - Main Body.
The machine can be set to deactivate Auto Paper when original is set in the ADF or on the original glass.
0
Auto Paper is incompatible with Auto Zoom, while Image Rotation is available.
0
Auto Paper will not select the tray of the size specified as Custom.
1
Press Reset on the control panel. If the machine is equipped with the ADF, close the ADF securely
before pressing Reset.
% [Auto Paper] is initially selected on the Copy Screen.
2
Position the original.
The tray loaded with an appropriate paper size will be selected automatically.
% Or, a message will prompt you that an appropriate size cannot be found in any tray. In this case,
load paper of the size referred in the message.
% Auto Paper may not function for the tray due to the paper specifications registered for that tray, even
with the selected size loaded.