Konica Minolta bizhub PRESS C8000e - Manual (Page 118)

bizhub PRESS C8000 4-23
4.5 Adjusting Color Tones 4
% Press [Default Set] to resume the standard level and return to the Quality Adjustment Screen.
% Proceed to step 7 if a sample copy is desired to check the adjustment result.
% To complete the adjustment, press [OK] to return to the Quality Adjustment Screen, then proceed
to step 8.
The Quality Adjustment Screen displays each adjustment level under [Saturation] when restored after
individual adjustments have been made.
7
Output a sample copy.
After setting the desired adjustment value, press [Adj. Proof Copy] on the Quality Adjustment Screen,
[Adj. Proof Copy] on the Saturation Screen, or Proof Copy on the control panel. Check the adjustment
result with output image.
% Repeat steps from 3 to 7 until the desired result is obtained.
8
Press [Close] on the Quality Adjustment Screen.
The Copy Screen will be restored. The [Quality Adj.] indication can be found under [Quality Adj.] on the
Copy Screen.