Konica Minolta bizhub PRESS C8000e - Manual (Page 196)

bizhub PRESS C8000 6-32
6.7 Using Perfect Binder PB-503 6
Original: single-sided, odd number
Body set: duplex copying
Cover print: ON, simplex
Original: single-sided, odd number
Body set: duplex copying
Cover print: ON, duplex
- Both simplex and duplex copy modes are available for body sets.
-
Specify whether to be blank, simplex-printed, or duplex-printed for covers. Covers can also be trimmed
to match with the thickness of the body set.
- The binding direction can be either left or right.
- The low power/shut off mode activates at the same time on the main body and Perfect Binder PB-503.
- Paper tray
– Body: Trays 1 to 9
– Cover: Trays 1 to 9 (available for Cover Print), cover tray of Perfect Binder PB-503 (unavailable for
Cover Print), upper/lower tray of Folding Unit FD-503 post inserter (unavailable for Cover Print)
- For details of available sizes for body, see Section 3 of the User's Guide - Main Body.
- Paper size for cover
– Custom size of the body length (head to foot) within 5 mm difference, and of the body width
e 2 + body
thickness (1 mm or more) + (5 mm or more of trimming width if Trimming mode is specified)
– The maximum size accommodable in each tray is as follows.
– Trays 1 to 9: min. 139 mm
e 279 mm to max. 307 mm e 472 mm
– Perfect Binder PB-503 cover tray: min. 139 mm e 279 mm to max. 307 mm e 472 mm
– Upper/lower tray of Folding Unit FD-503 post inserter: min. 182 mm e 279 mm to max. 307 mm e
472 mm
Front cov-
er original Body set original Back cover origi-
nal
Body set output Cover print
Front cover orig-
inal Body set original Back cover orig-
inal
Body set output Cover print