Konica Minolta bizhub PRESS C8000e User Manual
Page 333
bizhub PRESS C8000
10-25
10.1
Utility Menu Screen Outlines
10
[Schedule Cross Axis Unit (Init. Value)]
Select the unit of horizontal axis on the Schedule
Screen.
This setting is to be displayed on the machine
mounted with Image Controller IC-601.
Timetable, Time Frame (m), Sheet Volume
[Hold Job for Outputting (Init. Value)]
Specify whether or not to delete the output data of
hold job.
Delete, Save
[Destination for HDD Recall (Default)]
Select the desired operation from printing, hold-
ing, or both printing and holding for the job data
recalled from the HDD.
Print, Hold, Print & Hold
[Offset Output Mode]
Specify how to offset the output sets.
Change Out Pos., Partition Paper (Tray 1
to 9, PI 1, PI 2), Stop Print
[Needless Tab Paper Exit]
Specify whether or not to automatically discharge
the oddments of tabbed sheets loaded in a tray as
a set.
ON, OFF
[Detect Double Feed JAM]
Specify whether or not to detect the double feed-
ing.
ON, OFF
[Fusing Stability (Quick Start)]
Specify whether or not to wait till the machine
completes the warmup to meet controlled tem-
perature conditions for a specified tray when a
print job is queued.
Speed, Image Quality
[Fusing Stability (Mixed Media)]
Specify whether or not to wait till the machine
completes the warmup for a tray to be switched
from the one currently used, if they have different
temperature while operating a print job with mul-
tiple trays specified.
Speed, Image Quality, Best Quality
[07 Copy Setting]
[Fold & Staple Auto Selection]
Specify whether or not to automatically set the
Booklet mode when Fold & Staple mode is select-
ed.
ON, OFF
[Orig. Glass Auto Size Select]
Specify whether or not to automatically select the
same size of copy paper as the original when
placed on the original glass.
ON, OFF
[ADF Auto Size Select]
Specify whether or not to automatically select the
same size of copy paper as the original when
placed on the ADF.
ON, OFF
[Auto Zoom (Original Glass)]
Specify whether or not to automatically set an ap-
propriate magnification ratio to correspond to the
selected paper size when detecting the original
size placed on the original glass.
ON, OFF
[Auto Zoom (ADF)]
Specify whether or not to automatically set an ap-
propriate magnification ratio to correspond to the
selected paper size when detecting the original
size placed on the ADF.
ON, OFF
[Non-Image Area Erase]
Specify the condition of Non-Image Area Erase
function.
Yes, APS/AMS, Except Orig. Glass (1:1)
[ADF Frame Erase]
Set to erase the frame when copying in ADF
mode.
None, 1 mm, 2 mm, 3 mm, 4 mm, 5 mm
Menu Item/Description
Setting options (with default bolded)