Konica Minolta bizhub PRESS C8000e - Manual (Page 297)

bizhub PRESS C8000 9-2
9.1 Cleaning Image Scanning Section 9
9 Maintenance and Troubleshooting
9.1 Cleaning Image Scanning Section
In order to maintain optimum copy quality, always keep the following areas clean.
9.1.1 Cleaning the Original Glass
Raise the document feeder, then clean the original glass with a clean
soft cloth. The glass may also clean with a soft cloth dampened
slightly with water, if it is difficult to clean.
NOTICE
Never use paint solvents, such as benzine or thinners, to clean the
original glass.
9.1.2 Cleaning the ADF Guide Cover
The ADF guide cover should be kept clean; otherwise soil marks may
be copied or the original size cannot be detected from the original
glass correctly. Raise the document feeder, then clean the cover with
a clean soft cloth.
NOTICE
Never use paint solvents, such as benzine or thinners, to clean the
original glass and ADF guide cover.
9.1.3 Cleaning the Exterior of the Machine
Wipe the exterior clean with a soft cloth dampened slightly with neu-
tral detergent.
NOTICE
Be sure to turn off the main power switch of the main body before
cleaning. Never use paint solvents, such as benzine or thinners, to
clean the exterior of the machine.
9.1.4 Cleaning the Control Panel
Clean the control panel with a dry soft cloth.
NOTICE
Be careful not to press the keys or touch panel too hard while clean-
ing the control panel. Never use neutral detergent, glass cleaner, or
paint solvents such as benzine or thinners to clean the control panel.