beautypg.com

12 [03 administrator setting] - [06 common setting – Konica Minolta bizhub PRESS C8000e User Manual

Page 392

background image

bizhub PRESS C8000

10-84

10.12

[03 Administrator Setting] - [06 Common Setting]

10

10.12

[03 Administrator Setting] - [06 Common Setting]

The following features can be provided by switching the selection.

NOTICE

[Schedule Cross Axis Unit (Init. Value)] is to be displayed on the machine mounted with Image Controller IC-
601.

Menu item

Description

Setting options (with
default bolded)

[1 Shot Message Indica-
tion Time]

Select the time span to display a shot message,
such as [Original size is A4], in the message area
of the touch panel.

3 seconds, 5 seconds

[Offset by Job Unit]

Specify whether or not to offset the output sheets
by job.

ON, OFF
Also specify the number
of jobs to be offset when
selecting ON for this
function (default: 1).

[Continuation Print]

Specify whether or not to output multiple reserve
jobs in succession without stopping the machine
at a job break.

Copy ON, Copy OFF,
Printer ON, Printer OFF

[Stop Button Function]

Specify whether to pause or abort a job when
Stop is pressed on the control panel.

Job Temp. Stop, Job
Stop Function

[Back Side Magnifica-
tion Adj.]

Specify whether to enable the lens adjustment
mode.

ON, OFF

[Tray Change Time]

Specify the length of time before copying be-
comes available when selecting another tray
loaded with different paper type after a copy/print
job is completed.

Short, Standard

[Prior Paper Type]

Specify whether or not to maintain the tempera-
ture suitable for coated paper by turning the fixing
unit roller.

Others, Coated, Thin
Coated

[Dash Length (Page
Stamp)]

Select the length of the dash to be used in a style
of [Page No.] in [Stamp].

Long, Short

[Center Crop Mark Trim
Margin]

Specify the space between the center crop mark
and image area (center crop mark trim margin).

0.0-20.0 mm (default:
1.0)

[Schedule Cross Axis
Unit (Init. Value)]

Select the unit of horizontal axis on the Schedule
Screen.

Timetable, Time Frame
(m), Sheet Volume

[Hold Job for Outputting
(Init. Value)]

Specify whether or not to delete the output data
of hold job.

Delete, Save

[Destination for HDD
Recall (Default)]

Select the desired operation from printing, hold-
ing, or both printing and holding for the job data
recalled from the HDD.

Print, Hold, Print & Hold

[Offset Output Mode]

Specify how to offset the output sets.

Change Out Pos., Par-
tition Paper (Tray 1 to 9,
PI 1, PI 2), Stop Print

[Needless Tab Paper
Exit]

Specify whether or not to automatically discharge
the oddments of tabbed sheets loaded in a tray
as a set.

ON, OFF

[Detect Double Feed
JAM]

Specify whether or not to detect the double feed-
ing.

ON, OFF

[Fusing Stability (Quick
Start)]

Specify whether or not to wait till the machine
completes the warmup to meet controlled tem-
perature conditions for a specified tray when a
print job is queued.

Speed, Image Quality

[Fusing Stability (Mixed
Media)]

Specify whether or not to wait till the machine
completes the warmup for a tray to be switched
from the one currently used, if they have different
temperature while operating a print job with mul-
tiple trays specified.

Speed, Image Quality,
Best Quality