Konica Minolta bizhub PRESS C8000e - Manual (Page 267)

bizhub PRESS C8000 7-35
7.4 Schedule 7
7.4.5 Changing Paper Setting of the Tray
If no appropriate tray is found for a reserved job, the paper setting of that job needs to be changed. Display
the Change Tray Paper dialog to change the paper setting.
The following conditions are required for the tray to be changed.
-
The job to change the paper setting is currently suspended or idling.
-
The tray to change the paper setting is not scheduled for use in jobs to be output before the job in ques-
tion.
- The tray information is mismatched to make it unavailable for feeding.
If a tray cannot be changed in the paper setting, the tray key appears grayed out on the Change Tray Paper
dialog to show inactivity.
1
Follow the procedure on page 7-30 to display the Schedule Screen.
2
Select the job bar to be changed in the paper setting of the tray.
The operation dialog and paper setting dialog will be displayed.
3
Select the tray to be changed in the paper setting from the operation dialog, then press [Change Tray
Paper].
The Change Tray Paper dialog will be displayed.
4
Select the desired tray key, then press [Change Setting].