beautypg.com

Konica Minolta bizhub PRESS C8000e User Manual

Page 326

background image

bizhub PRESS C8000

10-18

10.1

Utility Menu Screen Outlines

10

[04 Finisher Adjustment] (Finisher FS-612)
This menu item is to be displayed and allowed on the machine mounted with Finisher FS-
612.

[01 Saddle Stitcher Stopper]

Adjust the staple positions in width-
wise direction of paper determined in
Fold & Staple mode.

Objects of adjustment:
Full Area, A3

w, B4 w, SRA4 w, A4 w, 12

e 18 w, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w,
8.125

e 13.25 w, 8.5 e 13 w, 8.25 e 13 w,

8

e 13 w, 8K w, 16K w, Custom (380-460

mm), Custom (220-379 mm)
Adjustable range: -128 to +127
(1 step = 0.1 mm)

*

[02 Half-Fold Stopper Adj.]

Adjust the misalignment in edges of
output sheets for each paper size.

Objects of adjustment:
Full Area, A3

w, B4 w, SRA4 w, A4 w, 12

e 18 w, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w,
8.125

e 13.25 w, 8.5 e 13 w, 8.25 e 13 w,

8

e 13 w, 8K w, 16K w, Custom (380-460

mm), Custom (220-379 mm)
Adjustable range (top of output sheet):
-128 (Long) to +127 (Short)
(1 step = 0.1 mm)

*

[03 Punch Adjustment]
This menu item is to be displayed and allowed on the machine mounted with Punch Kit PK-
512/PK-513, which is to be installed in Finisher FS-612.

[01 Vertical Position Adj.]
Adjust the misalignment in center posi-
tions of paper and punch holes for
each paper size.

Objects of adjustment:
Full Area, A3

w, B4 w, A4 w/v, B5 w/v,

A5

w/v, 11 e 17 w, 8.5 e 14 w, 8.5 e 11

w/v, 5.5 e 8.5 w/v, 8.125 e 13.25 w, 8.5

e 13 w, 8.25 e 13 w, 8 e 13 w, 8K w, 16K

w/v, 9 e 11 v
Adjustable range:
-50 (Backward) to +50 (Forward)
(1 step = 0.1 mm)

*

[02 Horizontal Position Adj.]
Adjust the distance from the edge of
the output sheet to the center of punch
holes.

Objects of adjustment:
PI Tray, Main Body Tray
Adjustable range:
-50 (Wide) to +50 (Narrow)
(1 step = 0.1 mm)

*

[03 Registration Adjustment]
Adjust the registration amount if punch
positions are inclined.

Objects of adjustment:
Main Body/Reverse, Main Body/ADU, PI 1
Tray, PI 2 Tray
Adjustable range:
-20 to +20
(1 step = 0.8 mm)

*

[04 Paper Edge Detect Sensor]
Detect the edge of paper to be a refer-
ence point in punching operation.

Start

*

[04 Tri-Fold Adjustment]

Adjust the tri-folded positions for each
paper size.

Objects of adjustment:
Full Area, A4

w, 8.5 e 11 w, 16K w

Adjustable range:
-128 (Leftward) to +127 (Rightward)
(1 step = 0.1 mm)

*

[05 2 Pos. Staple Pitch Adj.]

Adjust the staple pitch determined in
Fold & Staple and Staple modes.

Objects of adjustment:
Fold & Staple, Staple
Adjustable range:
+128 to +160
(1 step = 1 mm)

*

Menu Item/Description

Setting options (with default bolded)