Konica Minolta bizhub PRESS C8000e - Manual (Page 116)

bizhub PRESS C8000 4-21
4.5 Adjusting Color Tones 4
4.5.2 Adjusting Saturation: Saturation
Adjust the vividness of colors.
1
Press [COPY] tab to display the Copy Screen.
2
Press [Quality Adj.] on the Copy Screen.
3
Position the original.
% Prepare an original for adjusting the saturation, and position it into the ADF or on the original glass.
4
Make an adjustment for Saturation on the Quality Adjustment Screen.
Use [-] and [+] on the right side of [Saturation] to specify the desired adjustment level.
Specify a negative level to decrease the saturation of whole copy image, or a positive level to increase it.
% Proceed to step 5 to make the adjustment for Saturation on the Saturation Screen. Proceed to step
6 to make the saturation adjustment for red, green, and blue individually.
% Proceed to step 7 if a sample copy is desired to check the adjustment result.
% Proceed to step 8 to complete the adjustment.
Original Output
Saturation