Konica Minolta bizhub PRESS C8000e - Manual (Page 353)

bizhub PRESS C8000 10-45
10.9 [03 Administrator Setting] - [01 System Setting] 10
10.9.2 [04 Restrict User Access] - [01 Lock/Delete Mode Memory] - [02 Scan Mode
Memory]
Lock scan job settings stored in Mode Memory to avoid being erased while making another entry. Locked
mode memory can also be released, or deleted from this setting screen.
1
Follow the procedure on page 10-2 to display the Administrator Setting Menu Screen.
2
Press [01 System Setting], [04 Restrict User Access], [01 Lock/Delete Mode Memory], and [02 Scan
Mode Memory] in sequence.
3
Lock/unlock a mode memory.
% A specified name shows on the right side of the entry number, if that entry has already been made.
% Press the key on the left side of the desired number to lock the entry, with a lock mark displayed on
that key.
% Pressing the locked key will clear the lock mark and release the lock.
% Pressing the key without a name entered will neither lock the entry nor display the lock mark.
4
Delete a mode memory.
% Select the entry number you want to delete.
% Pressing [Delete] will delete the selected entry and the name of it. The highlighted key restores nor-
mal display.
NOTICE
Locked entry of Mode Memory can also be deleted. Note that the entry once deleted cannot be re-
called.
Up to 30 job settings can be stored in Mode Memory. Use [Next] or [Previous] to scroll to the desired
entry.
5
Press [OK] to complete the setting.
% To cancel the change, press [Cancel].
In either case, the Lock/Delete Mode Memory Menu Screen will be restored.