Konica Minolta bizhub PRESS C8000e - Manual (Page 358)

bizhub PRESS C8000 10-50
10.9 [03 Administrator Setting] - [01 System Setting] 10
2
Press [01 System Setting], [05 Expert Adjustment], [03 Printer Adjustment], and [05 Lead Edge Erase
Adjustment] in sequence.
The Lead Edge Erase Adjustment Screen will be displayed.
3
Press [Print Mode].
The Print Mode Screen will be displayed.
4
Select A3
w paper tray, then press Start on the control panel.
A sample pattern will be output.
Press [Exit Print Mode] to return to the Lead Edge Erase Adjustment Screen.
5
Measure the resultant restart timing.
6
If any adjustment is required, enter the desired adjustment value using the touch panel keypad.
% Use [+/-] to specify the value to be positive or negative.
% Press [Set] to change the current data.
7
Repeat the steps from 3 to 6 until the desired result is obtained.
8
Press [Return] to restore the Printer Adjustment Menu Screen.
10.9.10 [05 Expert Adjustment] - [05 Scan Adjustment]
Make adjustments related to scanning function.
This adjustment can also be performed by selecting [Adjustment] - [01 Machine Adjustment] - [02 Scanner
Adjustment] from the Machine Screen.
1
Follow the procedure on page 10-2 to display the Administrator Setting Menu Screen.
2
Press [01 System Setting], [05 Expert Adjustment], and [05 Scan Adjustment] in sequence.
The Scan Adjustment Screen will be displayed.
% Please refer to Section 8 of the User's Guide - Main Body for details of subsequent operations.