Konica Minolta bizhub PRESS C8000e - Manual (Page 66)

bizhub PRESS C8000 3-28
3.5 Simplex/Duplex Setting 3
2
Press [COPY] tab to display the Copy Screen.
3
Select [1->2] copy mode.
The [Separate Scan] key will be automatically selected on the screen.
% Do not press Reset on the control panel at this point, otherwise the machine will be disabled for
scanning the original placed on the original glass.
4
Specify the direction of the original.
Select a direction key provided under [Original Setting] according to the actual direction of the original.
% See page 3-7 for details on setting an original direction.
5
Specify the bind direction of double-sided copies.
Press [Output Setting] on the Copy Screen to display the Output Setting Screen.
Press the desired bind direction key under [Bind Direction].
To make top-bound double-sided copies (printed upside down on back pages), select [Top] under [Bind
Direction].
Press [OK].
% See page 3-5 for details on specifying a bind direction of double-sided copies.
6
Select additional copy conditions, as desired.
7
Press Start on the control panel.
The front side image of the double-sided copy will be scanned into memory.
8
Replace the original on the original glass with that of the back side image, then press Start on the con-
trol panel.