beautypg.com

13 [03 administrator setting] - [07 copy setting, 03 administrator setting] - [07 copy setting] -86 – Konica Minolta bizhub PRESS C8000e User Manual

Page 394

background image

bizhub PRESS C8000

10-86

10.13

[03 Administrator Setting] - [07 Copy Setting]

10

10.13

[03 Administrator Setting] - [07 Copy Setting]

The following features can be provided by switching the selection. This setting can also be performed by se-
lecting [04 Copy Setting] from the User Setting.

Menu item

Description

Setting options (with
default bolded)

[Fold & Staple Auto Se-
lection]

Specify whether or not to automatically set the
Booklet mode when Fold & Staple mode is select-
ed.

ON, OFF

[Orig. Glass Auto Size
Select]

Specify whether or not to activate Auto Paper
when an original is placed on the original glass.

ON, OFF

[ADF Auto Size Select]

Specify whether or not to activate Auto Paper
when an original is placed on the ADF.

ON, OFF

[Auto Zoom (Original
Glass)]

Specify whether or not to activate Auto Zoom
when an original is placed on the original glass.

ON, OFF

[Auto Zoom (ADF)]

Specify whether or not to activate Auto Zoom
when an original is placed on the ADF.

ON, OFF

[Non-Image Area Erase]

Specify the conditions to be applied to the Non-
Image Area Erase function.
[ON]: Always erase the outside area of the origi-
nal.
[APS/AMS]: Erase the outside area of the original
when Auto Paper or Auto Zoom is activated.
[Except Orig. Glass (1:1)]: Erase the outside area
except when making a same-sized copy as the
original scanned from the original glass.

Yes, APS/AMS, Except
Orig. Glass (1:1)

[ADF Frame Erase]

Set to erase the frame when copying in ADF
mode.

None, 1 mm, 2 mm, 3
mm, 4 mm, 5 mm

[Interruption Suspend
Setting]

Specify the timing to interrupt the current job
when Interrupt is pressed on the control panel
while copying is in progress.
[Stop Immediately]: The machine stops copying
immediately to allow an interrupt job.
[When Current Comp.]: The machine completes
to output the current set before stopping to allow
an interrupt job.

Stop Immediately,
When Current Comp.

[Printer Prohibit Timer]

Set the time interval to suspend a print job via PC
after the last operation of touch keys.

Off, 15 seconds, 30
seconds, 60 seconds,
90 seconds

[Orig./Out Bind Direc-
tion Set]

Specify whether or not to conform the bind direc-
tion in Output Setting with that specified in Origi-
nal Setting.

ON, OFF

[Specify Default Tray
APS OFF]

Specify the tray to be automatically selected
when Auto Paper (APS) is canceled.

APS Tray, Tray 1, Tray
2, Tray 3, Tray 4, Tray 5,
Tray 6, Tray 7, Tray 8,
Tray 9

[Scan Stop by Pull Out
Tray]

Specify whether or not to stop the scanning oper-
ation if any tray is pulled out.

ON, OFF