Konica Minolta bizhub PRESS C8000e - Manual (Page 250)

bizhub PRESS C8000 7-18
7.2 Hold Job and HDD Store Job 7
A dialog to select [Print], [Hold], or [Print & Hold] will be displayed.
5
Use the control panel keypad to change the print quantity, if desired, then select one of the three op-
tions.
% The stored job retains the information of specified print quantity, however, you can change it as de-
sired.
% Press [Print] to start printing.
% With [Hold] selected, the job data will be recalled to the list of the Hold Job Screen without being
output.
% With [Print & Hold] selected, the machine will start printing while the job data being recalled to the
list of the Hold Job Screen.
7.2.8 Deleting HDD Store Job
Follow the procedure below to delete a job stored on the HDD.
0 Multiple jobs can be deleted at a time.
0 The folder created on the HDD Store Route Screen can also be deleted.
0 If another data with the same file name exists, " " mark appears on the right side of the file name.
1
Press [HDD RECALL] tab to display the HDD Recall Screen.
The HDD Store Route Screen of the HDD Recall Screen will be displayed.
2
Display the directory including the job to be deleted.
% Proceed to step 3, if the job to be deleted shows on the HDD Store Route Screen.
% When deleting a job stored in another folder provided on the HDD Store Route Screen, press the
section of that folder. The contents of selected folder will be listed on the screen.
% If the data with the same file name exist, " " mark appears on the right side of the file name.