beautypg.com

Konica Minolta bizhub PRESS C8000e User Manual

Page 134

background image

bizhub PRESS C8000

4-39

4.10

Adjusting Color Balance: Color Balance

4

3

Press [Color Balance] on the Quality Adjustment Screen.

The Color Balance Screen will be displayed.

4

Position the original.

% Prepare an original for adjusting Color Balance, and position it into the ADF or on the original glass.

5

Select the color and density area to be adjusted.

% Check the high, middle, and low density areas of the original, then select the desired density area

of the color to be adjusted.

% To adjust the whole density area, select [All] of that color.

6

Adjust the color level in selected density area.

Use [

+] and [,] to specify the desired level within the range from -10 to +10.

% Select [0] to resume the standard level.
% Press [Default Set] to resume the standard level and return to the Quality Adjustment Screen.
% Proceed to step 7 if a sample copy is desired to check the adjustment result.
% To complete the adjustment, press [OK] and proceed to step 8.

7

Output a sample copy.

After setting the desired adjustment level, press [Adj. Proof Copy] on the Quality Adjustment Screen,
[Adj. Proof Copy] on the Color Balance Screen, or Proof Copy on the control panel. Check the adjust-
ment result with output image.
% Repeat steps from 3 to 7 until the desired result is obtained.

8

Press [Close] on the Quality Adjustment Screen.

The Copy Screen will be restored. The [Color Balance] indication can be found under [Quality Adj.] on
the Copy Screen.