Konica Minolta bizhub PRESS C8000e User Manual
Page 76
bizhub PRESS C8000
3-38
3.6
Paper Setting
3
14
With [Standard] selected, the machine automatically detects the standard size when loaded in that tray.
% There is, however, a group of sizes having subtle distinctions, so that the machine cannot distin-
guish in the operation of size detection. Let the machine detect a specific size by identifying these
sizes as any one of them.
Press [Detect Size Setting]. The Detect Size Setting Screen will be displayed.
Groups of indistinguishable sizes are arranged in columns. Press the desired size in each column to
select it. Press [OK].
% Detectable sizes may vary depending on the selection made for the use of K sizes in the Adminis-
trator Setting provided on the Utility Menu Screen. For details, see Section 9 of the User's Guide -
Main Body.
% Detectable standard sizes vary depending on the paper tray.
Proceed to step 17.
15
Pressing [Custom] will display the Custom Size Screen.
To specify a custom size:
% Press [(1)], then use the touch panel keypad, [,], [+], or control panel keypad to enter the desired
lengthwise dimension.
% Press [(2)], then use the touch panel keypad, [,], [+], or control panel keypad to enter the desired
widthwise dimension.
% Press [(3)], then use the touch panel keypad, [,], [+], or control panel keypad to enter the desired
trimming amount for covers used in Fold & Staple/Multi Half Fold mode. The key to enter the trim-
ming amount appears for the machine with Saddle Stitcher SD-506 installed.
To register a specified custom size:
% When you complete entering the desired size, press [Size Registration]. The Size Registration
Screen will be displayed. Entries from [01] to [20] are provided on the screen.
% Press the desired number key, using [Previous] and [Next] as needed to scroll.