Konica Minolta bizhub PRESS C8000e - Manual (Page 197)

bizhub PRESS C8000 6-33
6.7 Using Perfect Binder PB-503 6
- Paper weight
– Body: 64 g/m
2
to 105 g/m
2
(available to be specified from 64 g/m
2
to 74 g/m
2
, 75 g/m
2
to 80 g/m
2
, and
81 g/m
2
to 105 g/m
2
)
– Cover: 81 g/m
2
to 220 g/m
2
(available to be specified from 81 g/m
2
to 105 g/m
2
, 106 g/m
2
to 135 g/m
2
,
136 g/m
2
to 162 g/m
2
, and 163 g/m
2
to 220 g/m
2
)
-
Paper type
– Body: Fine, Plain, Color, Coated-ML, Coated-MO
– Cover: Fine, Plain, Coated-GL, Coated-ML, Coated-GO, Coated-MO
- Number of sheets to be bound:
– Fine, Plain: 10 sheets min. to 300 sheets max., or within 30 mm thick
– Colored, Coated: 10 sheets min. to 150 sheets max., or within 15 mm thick
– Z-folded insertions: 4 sheets max. in duplex mode, or 2 sheets max. in simplex mode using Fine/Plain
Maximum number of z-folded insertions and body sheets:
-
Covers fed from trays 1 to 9 can be simplex- or duplex-printed. Covers fed from the cover tray of Per-
fect Binder PB-503 or from the upper/lower tray of Folding Unit FD-503 post inserter cannot be
printed.
- Cover Trim
– With Cover Trim specified, the machine trims the cover by the amount automatically estimated from the
following formula, in the range from 30 mm to 40 mm in 0.1 mm increments.
– (Cover width) - (Body width e 2) - (Spine width)
– If the estimated amount exceeds 10 mm, the machine will automatically trim the cover whether this
function is activated or not.
- Fine Adjustment
– Cover Lead Edge Adjustment: Adjusts the lateral position of front cover and body set in the range from
-12.8 mm to +12.8 mm, in 0.1 mm increments.
– Cover Trimming Adjustment: Adjusts the trimming width in the range from -5.0 mm to +5.0 mm, in 0.1
mm increments.
– Cover Image Shift Adjustment: Adjusts the position of image to be printed on the front/back cover when
using Cover Print mode.
Specify the custom cover size from the Perfect Bind Screen. See page 6-34 for details.
For 8.5" e 11" v body set to be bound with a cover fed from trays 1 to 9, the maximum thickness should be
less than 30 mm.
Cover Trim OFF: 460 - (216
e 2) = 28 mm
Cover Trim ON: 460 - (216 e 2) - (3 mm in trimming width) = 25 mm
If thickness of 8.5 e 11 v body set is more than that mentioned above, use the cover feeding tray of Perfect
Binder PB-503 or the upper/lower tray of Folding Unit FD-503 post inserter to attach a cover.
d
Reference
You can specify the paper weight of body sets and covers available in Perfect Binder PB-503.
The minimum/maximum number of sheets to be bound in perfect binding can be changed according to the
paper weight of body set.
The machine can be set to detect the thickness of body set and to stop the binding operation temporarily if
the cover width to be used is unsuitable for the body set.
For details, see Section 9 of the User's Guide - Main Body.
Z-folded insertions Body sheets Total at maximum
1 sheet 200 sheets 201 sheets
2 sheets 150 sheets 152 sheets
3 sheets 100 sheets 103 sheets
4 sheets 50 sheets 54 sheets