Konica Minolta bizhub PRESS C8000e - Manual (Page 169)

bizhub PRESS C8000 6-5
6.1 Making Output Setting 6
NOTICE
Never return the saddle stitcher tray to its original position with
the tray stand opened.
4
Press [OK] on the Output Setting Screen.
The Copy Screen will be restored.
NOTICE
Output trays each have a limit in capacity. Be careful not to exceed the limit, otherwise unexpected
trouble may be caused.
6.1.3 [Pile Set] and [Stacker Auto] of Large Capacity Stacker LS-505
[Pile Set] keys
If the machine has Large Capacity Stacker LS-505 installed, [Pile Set] appears on the Output Setting
Screen.
Press [Allow] to highlight it if you allow paper from several jobs to pile up in the large capacity stacker, or
press [Restrict] if you do not, then press [OK].
[Stacker Auto] key
If the machine has two units of Large Capacity Stacker LS-505 installed, the [Stacker Auto] key appears on
the Output Setting Screen. With [Stacker Auto] pressed, the machine delivers output sheets as follows (sup-
posing the one on the right side of the two large capacity stackers as stacker 1, and the other on the left
side as stacker 2):
-
When the stacker 1 reaches the limit, the next job will be delivered to the stacker 2.
-
If the stacker 1 becomes unavailable due to some trouble, the stacker 2 will take over.