Konica Minolta bizhub PRESS C8000e - Manual (Page 200)

bizhub PRESS C8000 6-36
6.7 Using Perfect Binder PB-503 6
Select one from [64-74 g/m2], [75-80 g/m2], and [81-105 g/m2].
% The binding operation may not be performed even if one of the paper weight mentioned above is
specified.
% The number of body set pages may be limited depending on the selected paper weight.
8
Press [Output Setting] and [Perfect Bind] in sequence.
The Perfect Bind Screen will be displayed.
The heater of the perfect binder automatically starts warming up. The warmup takes approximately 20
minutes.
NOTICE
Perfect Binder PB-503 will not stop warming up even if [Default Set] is pressed on the Output Setting
Screen or Reset is pressed on the control panel.
To stop using Perfect Binder PB-503, return to the Machine Screen, then press [OFF] of PB heater
switch. When you stop using the perfect binder, be sure to turn off the heater so as to prevent the deg-
radation of paste pellets.
9
Press [Change Set] on the right side of [Cover Tray].
The Cover Tray Screen will be displayed.
10
Select the tray loaded with cover paper.
Press the tray key loaded with cover sheets in step 4.