Konica Minolta bizhub PRESS C8000e - Manual (Page 322)

bizhub PRESS C8000 10-14
10.1 Utility Menu Screen Outlines 10
[02 Tri-Fold-in Pos. Adj.]
Adjust the folded positions in Tri-Fold-
in mode determined by the folding unit.
The position of Single Fold is calculat-
ed from the edge of the sheet, while
that of Double Fold is calculated from
the position of Single Fold. Be sure to
start with the Double Fold adjustment,
then proceed to the Single Fold adjust-
ment. Objects of adjustment:
Full Area, A3
w, B4 w, SRA4 w, A4 w, 12
e 18 w, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w,
8K
w, Custom (380-458 mm), Custom
(279-379 mm)
Adjustable range:
-50 (Short) to +50 (Long)
(1 step = 0.1 mm)
*
[03 Tri-Fold-out Pos. Adj.]
Adjust the folded positions in Tri-Fold-
out mode determined by the folding
unit.
The position of Single Fold is calculat-
ed from the edge of the sheet, while
that of Double Fold is calculated from
the position of Single Fold. Be sure to
start with the Single Fold adjustment,
then proceed to the Double Fold ad-
justment. Objects of adjustment:
Full Area, A3
w, B4 w, SRA4 w, A4 w, 12
e 18 w, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w,
8K
w, Custom (380-458 mm), Custom
(279-379 mm)
Adjustable range:
-50 (Short) to +50 (Long)
(1 step = 0.1 mm)
*
[04 Double Parallel Pos. Adj.]
Adjust the folded positions in Double
Parallel mode determined by the fold-
ing unit.
The position of Single Fold is calculat-
ed from the edge of the sheet, while
that of Double Fold is calculated from
the position of Single Fold. Be sure to
start with the Single Fold adjustment,
then proceed to the Double Fold ad-
justment. Objects of adjustment:
Full Area, A3
w, B4 w, SRA4 w, A4 w, 12
e 18 w, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w,
8K
w, Custom (380-458 mm), Custom
(279-379 mm)
Adjustable range:
-50 (Long) to +50 (Short)
(1 step = 0.1 mm)
*
[05 Z-Fold Position Adj.]
Adjust the folded positions in Z-Fold
mode determined by the folding unit.
The position of Single Fold is calculat-
ed from the edge of the sheet, while
that of Double Fold is calculated from
the position of Single Fold. Be sure to
start with the Single Fold adjustment,
then proceed to the Double Fold ad-
justment. Objects of adjustment:
Full Area, A3
w, B4 w, SRA4 w, A4 w, 12
e 18 w, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w,
8K
w, Custom (380-458 mm), Custom
(279-379 mm)
Adjustable range:
-50 (Long) to +50 (Short)
(1 step = 0.1 mm)
*
[06 Gate Position Adj.]
Adjust the folded positions in Gate
mode determined by the folding unit.
The position of Single Fold is calculat-
ed from the edge of the sheet, while
that of Double Fold is calculated from
the position of Single Fold and that of
Triple Fold from that of Double Fold. Be
sure to start with the Single Fold ad-
justment. Objects of adjustment:
Full Area, A3
w, B4 w, SRA4 w, A4 w, 12
e 18 w, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w,
8K
w, Custom (380-458 mm), Custom
(279-379 mm)
Adjustable range:
Single Fold/Triple Fold: -50 (Long) to +50
(Short)
(1 step = 0.1 mm)
Double Fold: -50 (Short) to +50 (Long)
(1 step = 0.1 mm)
*
[04 Finisher Adjustment] (Large Capacity Stacker LS-505)
This menu item is to be displayed and allowed on the machine mounted with Large Capacity
Stacker LS-505.
[05 Stacker Adjustment]
[01 Paper Width Adjustment]
Adjust the position of adjustment
plates if output sheets show misalign-
ment in crosswise direction on the
stacker tray. Objects of adjustment:
Stacker No. 1, Stacker No. 2
Adjustable range:
-20 (Narrow) to +20 (Wide)
(1 step = 0.1 mm) *
Menu Item/Description Setting options (with default bolded)