Konica Minolta bizhub PRESS C8000e User Manual
Page 356
bizhub PRESS C8000
10-48
10.9
[03 Administrator Setting] - [01 System Setting]
10
10.9.6
[05 Expert Adjustment] - [01 AES Level Adjustment]
Change the color/black density level to be applied when [Auto] is selected for [Copy Density] in [Quality Ad-
justment] on the Copy Screen.
1
Follow the procedure on page 10-2 to display the Administrator Setting Menu Screen.
2
Press [01 System Setting], [05 Expert Adjustment], and [01 AES Level Adjustment] in sequence.
3
Select the desired level for each of [Color] and [Black].
4
Press [OK] to complete the setting.
% To cancel the change, press [Cancel].
In either case, the Expert Adjustment Menu Screen will be restored.
10.9.7
[05 Expert Adjustment] - [02 Erase Correction] - [01 Non-Image Area Erase]
The following three options are provided to specify the condition of Non-Image Area Erase function.
-
[Erase Outside of Original]: Always erase the outside area of the original.
-
[ON - APS/AMS Only]: Erase the outside area of the original only when Auto Paper or Auto Zoom is
activated.
-
[Except Orig. Glass (1:1)]: Erase the outside area except when making a same-sized copy as the original
scanned from the original glass.
1
Follow the procedure on page 10-2 to display the Administrator Setting Menu Screen.
2
Press [01 System Setting], [05 Expert Adjustment], [02 Erase Correction], and [01 Non-Image Area
Erase] in sequence.
The Original Scan Area Setting Screen will be displayed.
3
Select the desired setting key.