Konica Minolta bizhub PRESS C8000e User Manual
Page 332
bizhub PRESS C8000
10-24
10.1
Utility Menu Screen Outlines
10
[02 E-Mail Initial Setting]
Configure initial settings for e-mail or perform
transmitting/receiving test.
Use E-mail System: ON, OFF
Time Zone
Trans (SMTP) Mail Server
SMTP Port Number
Trans Mail Server Timeout
New-arrival Check Interval
Receive Mail Server
Receive Mail Server Type: POP3, IMAP
POP3/IMAP Port Number
Receive Mail Account
Receive Mail Password
E-mail Address for Machine
POP (IMAP) before SMTP Auth.: ON, OFF
SSL Encryption of SMTP: ON, OFF
SSL Encryption of POP (IMAP): ON, OFF
SMTP Authentication: ON, OFF
SMTP Authentication User ID, SMTP Au-
thentication Password
*
[03 http Communication Setting]
Configure the http communication settings.
Enable Proxy Server: ON/OFF, Proxy
Server Address, Proxy Server Port, Enable
SSL: ON/OFF, Enable Authentication:
ON/OFF, Authentication User Name, Au-
thentication Password
*
[04 Web LCD Setting]
Configure the Web LCD settings.
Use Web LCD, Web LCD Server Address,
Web LCD Server Gateway, Web LCD Serv-
er Net Mask
*
[06 Common Setting]
[1 Shot Message Indication Time]
Select the time span to display a shot message in
the message area of the touch panel.
3 seconds, 5 seconds
[Offset by Job Unit]
Specify whether or not to offset the output sheets
by job. When selecting ON, specify the number of
jobs with output sheets to be offset.
ON, OFF
[Continuation Print]
Specify whether or not to output multiple reserve
jobs in succession without stopping the machine
at a job break.
Copy ON, Copy OFF, Printer ON, Printer
OFF
[Stop Button Function]
Specify whether to pause or abort a job when
Stop is pressed on the control panel.
Job Temp. Stop, Job Stop Function
[Back Side Magnification Adj.]
Specify whether or not to activate the back side
magnification adjustment mode.
ON, OFF
[Tray Change Time]
Specify the length of time before copying be-
comes available when selecting another tray load-
ed with different paper type after a copy/print job
is completed.
Short, Standard
[Prior Paper Type]
Specify whether or not to maintain the tempera-
ture suitable for coated paper by turning the fixing
unit roller.
Others, Coated, Thin Coated
[Dash Length (Page Stamp)]
Select the length of the dash to be used in a style
of [Page No.] in [Stamp].
Long, Short
[Center Crop Mark Trim Margin]
Specify the space between the center crop mark
and image area (center crop mark trim margin).
0.0-20.0 mm (default: 1.0)
Menu Item/Description
Setting options (with default bolded)