Konica Minolta bizhub PRESS C8000e - Manual (Page 110)

bizhub PRESS C8000 4-15
4.4 Adjusting Red, Green, and Blue Colors 4
0 In Full Color mode, this adjustment properly reflects on the strength of red (R), green (G), and blue (B)
reproduced on a printed image.
0
Using Black or Single Color mode, this adjustment will operate to the reproducibility of each color of
colored original, giving effect to the strength of black or single color on a printed image.
0 To change the hue of images copied in Single Color mode, use the Color Balance adjustment.
1
Press [COPY] tab to display the Copy Screen.
2
Press [Quality Adj.] on the Copy Screen.
3
Position the original.
% Prepare an original for adjusting the red, green, and blue colors, and position it into the ADF or on
the original glass.
4
Make an adjustment for Red, Green, and Blue individually on the Quality Adjustment Screen.
Use [-] and [+] on the right side of [Red], [Green], or [Blue] to specify the desired adjustment level for
each.
Specify a negative level to make each color weaker, or a positive level to make it stronger.
% Proceed to step 5 to make the red color adjustment on the Red Screen.
% Proceed to step 6 to make the green color adjustment on the Green Screen.
% Proceed to step 7 to make the blue color adjustment on the Blue Screen.
% Proceed to step 8 if a sample copy is desired to check the adjustment result.
% Proceed to step 9 to complete the adjustment.
NOTICE
Pressing [Default Set] on the Quality Adjustment Screen will resume the standard level for all adjustment
items.