Konica Minolta bizhub PRESS C8000e - Manual (Page 177)

bizhub PRESS C8000 6-13
6.3 Using Finisher FS-521 6
% Selecting [Offset Sort] or [Offset Group] displays the Output Offset Screen. Use the touch panel key-
pad to enter the desired number of sets to be offset. Available range is from 1 to 9,999. When fin-
ished with the entry, press [OK].
% Select either [Face Up] or [Face Down], and either [1 to N] or [N to 1] provided under [Face/Order],
as needed.
% Selecting [N to 1] automatically sets and limits the Face mode to [Face Up].
5
Press [OK] on the Output Setting Screen.
An icon representing specified output mode will be displayed under [Output Setting] on the Copy
Screen.
NOTICE
The primary (main) tray gradually goes down while printed materials are output. DO NOT allow any
object to interfere with the operation of the primary (main) tray on the left side of the finisher, as any
interference may cause damage to the finisher.
NOTICE
The primary (main) tray of Finisher FS-521 has a limit in capacity. Be careful not to exceed the limit,
otherwise unexpected trouble may be caused.
% The suspension button provided on the top surface of Finisher FS-521 allows you to temporarily
stop printing, so that printed sheets can be taken out from the primary (main) tray. For details, see
Section 4 of the User's Guide - Main Body.