Konica Minolta bizhub PRESS C8000e - Manual (Page 262)

bizhub PRESS C8000 7-30
7.4 Schedule 7
7.4 Schedule
7.4.1 Outline of Schedule Screen
The Schedule Screen shows the printing, suspended, or reserved jobs displayed on the Reserved Job Screen
using job bars. It also allows you to change the order of reserved jobs from the job bar display, or to change
the paper tray specified for a reserved job.
The job bar display shows the relation between the paper tray to be used in a job and the following.
-
Number of sheets to be used in the job
- Estimated time to start and complete the job
-
Time required for the job (minute)
NOTICE
Descriptions provided here supposes that the machine is equipped with Paper Feeder Unit (with scanner)
PF-705 and Hard Disk Kit HD-514. The schedule function is available on the machine mounted with Image
Controller IC-601 in addition to the above options.
No. Name Description
1 [Schedule] Pressed to display the Schedule Screen of the Job
List Screen.
2 Paper tray items Displays loaded paper size, remaining amount, and
paper weight and type specified for the tray in Paper
Setting.
3 Unit of operation line Indicates the number of sheets to be used, required
time (minutes), or estimated time for reserved jobs.
4 Job bar display Separates the rows into reserved job areas with shad-
ing of gray, and indicates each job using blue, yellow,
or orange bar according to the following rules.
Blue: Available for output with plenty of paper
Yellow: Short supply of paper
Orange: Highly likely to stop due to a lack of paper, no
appropriate paper loaded, or unavailable for output
due to a different paper setting specified
5 [Unit Change] Pressed to switch the three units of operation-line
(Sheet Volume, Timetable, Time Frame (m)).
6 [-] [+] Pressed to change the scale of the job bar display.