Konica Minolta bizhub PRESS C8000e - Manual (Page 203)

bizhub PRESS C8000 6-39
6.7 Using Perfect Binder PB-503 6
% To adjust the lead edge of the cover, press [Cover Lead Edge Adj.]. Use the touch panel keypad,
[ +], [,], or the control panel keypad to enter the desired value, then press [+/-] to select positive
or negative of the adjustment value.
% To adjust the trimming width, press [Cover Trimming Adj.]. Use the touch panel keypad, [+], [,], or
the control panel keypad to enter the desired value, then press [+/-] to select positive or negative
of the adjustment value.
% To adjust the image position of the cover, press [Cover Image Shift Adj.]. Press [Front] or [Back] to
select the print side, then [Up/Down] or [Right/Left] to select the direction to be adjusted. Use the
touch panel keypad, [
+], [,], or the control panel keypad to enter the desired value, then press
[+/-] to select positive or negative of the adjustment value.
20
Press [OK].
The Perfect Bind Screen will be restored.
The screen shows the details of perfect binding settings currently made. Check the settings.
21
Press [OK] twice to return to the Copy Screen.
The Perfect Bind icon will be displayed under [Output Setting] on the Copy Screen.