Konica Minolta bizhub PRESS C8000e - Manual (Page 67)

bizhub PRESS C8000 3-29
3.5 Simplex/Duplex Setting 3
9
When scanning is completed, press [Separate Scan] to deselect the key.
The message [Press [Start] to copy] will be displayed.
% To delete the scanned data without printing, or to suspend the printing job, press Stop on the con-
trol panel.
10
Press Start on the control panel.
All the data in memory will be output.
% Printing will not start without the Copy Screen displayed. Please make sure to display the Copy
Screen.
3.5.3 Making Single-Sided Copies from Double-Sided Originals
This section describes how to make single-sided copies from double-sided originals using the ADF.
0 Specify Direction according to the direction of the original loaded in the ADF.
0 The side-bound single-sided copies (having the same edge as page top) can be made from top-bound
double-sided originals (printed upside down on back pages).
1
Position the original in the ADF.
2
Press [COPY] tab to display the Copy Screen.
3
Select [2->1] copy mode.
Double-sided original Simplex copy